Linnpower Skateboards Gearbox Compatibility & Guide
Linnpower Skateboards are recognized for their Premium Electric Skateboards & Longboards and robust Gear Drive systems. From EVO MK-1 All Terrain Electric Skateboards to THE ONE Racing Board, Long Range OX All Terrain Board, Zephyr Base & Pro Street Boards, Zephyr Max 2-in-1 Skateboards, and Viper miniboards, Linnpower gearboxes provide unmatched durability and performance.
Linnpower V4.3 AT & V4.3 MT Gearbox Overview
The earliest Linnpower gearbox recognized by riders was the V4.3 AT version, originally used in early Meepo Hurricane boards. Featuring a POM material main gear, it laid the foundation for reliability in Electric Skateboards. The V4.3 AT version is the most widely provided Linnpower gearbox or design solution for third-party brands. It’s important to note that not all gearboxes using POM gears are genuine Linnpower V4.3 units. In fact, Linnpower V4.3 gearboxes have an extremely low failure rate — only a single POM gear has ever needed replacement after tens of thousands of miles of use.
The Linnpower V4.3 AT gearbox is also known for its high compatibility with a variety of electric skateboards, including:
- Onsra Velar
- Exway Atlas series
- Evolve Electric Skateboards (EVOLVE GT, EVOLVE HADEAN, EVOLVE RENEGADE), However, it's important to note that we're not sure whether the V4.3 AT gearbox is compatible with the Evolve Diablo series or not.
- And more...
When EVO MK-1 All Terrain Electric Skateboards were mass-produced, the V4.3 MT version was introduced, updating the gearbox housing, mounting points, and clamps for mountain boards (sizes: 22x22, 20x20, 19x19, 18x18). This version improved compatibility and durability without sacrificing performance.
Linnpower V4.3 2IN1 Gearbox for THE ONE and OX
With the launch of THE ONE, Linnpower introduced the V4.3 2IN1 4G version. Like the Linnpower V4.3 MT version, its housing is crafted from high-quality 6061-T651 aluminum and precisely CNC-machined as a single piece. The gearbox retains the high-performance 4-gear design, offering excellent shock resistance and durability. Compared to standard gear structures, the 4-gear setup engages more teeth simultaneously, resulting in smoother operation, higher torque capacity, greater impact resistance, and lower noise.
The main difference between the Linnpower 2IN1 4G version and the MT version lies in the large gear: it has been upgraded from POM to steel to ensure it fits THE ONE. This redesign allows for a smaller and thinner gearbox, reducing the volume by 45% and weight by 12%, while increasing strength by 470% compared to the Linnpower V4.3 MT version.
Essentially, the Linnpower V4.3 2IN1 4G version was developed because the Linnpower V4.3 MT gearbox could not fit THE ONE. The unique structure of THE ONE requires a smaller and thinner gearbox, making the 2IN1 4G version a perfect solution.
With the release of the OX, we introduced the Linnpower V4.3 2IN1 3G — the first 3G gearbox under the Linnpower brand. Like all our gearboxes, it has undergone extensive testing over a long period. Prior to this, we had also designed 3G gearboxes for other brands.
The V4.3 2IN1 3G gearbox maintains the same housing material and sealing structure as previous V4.3 versions, and the gears use the same high-quality materials as the 4G version. The reason for the 3G version is that the OX requires a longer gear center distance (the distance between the motor and axle center).
Compared to the 2IN1 4G version, the 3G version offers better compatibility, while the 4G version provides the highest strength. If your board’s performance is close to or exceeds that of THE ONE and installation space allows, we recommend the 4G version; otherwise, the 3G version is the more suitable choice.
2IN1 4G vs 3G Versions
- 4G Version: Steel main gear, maximum strength, designed for high-performance boards like THE ONE.
- 3G Version: Compatible with OX, offers longer motor-to-axle distance and broader compatibility, ideal when full 4G strength isn’t necessary.
Linnpower ST/MINI Gearboxes
Based on feedback from Viper miniboards and Zephyr streetboards (Pro & Base) riders, we introduced the Linnpower ST/MINI gearboxes. These units feature a 3-gear all-steel design for durability and performance.
The V4.3 MT, V4.3 2IN1 3G, V4.3 2IN1 4G, and Linnpower ST/MINI gearboxes all use a clamp-mounted structure, with identical mounting hole patterns for easy compatibility.
Additionally, the buffers for V4.3 MT, V4.3 2IN1 3G, and V4.3 2IN1 4G are interchangeable, meaning the hub-end connectors are compatible with EVO MK-1 boards. The ST/MINI gearboxes feature brand-new buffer designs with Kegel-spec connectors, ensuring smooth performance and reliable installation.
Why Straight-Cut Gears?
All Linnpower gearboxes use Gear Drive straight-cut gears. Helical gears can reduce noise and increase torque, but they also increase bearing load, heat, and lubrication needs, leading to more frequent maintenance. For boards such as EVO MK-1, THE ONE, OX, Zephyr Max, and Viper miniboards, Linnpower prioritizes long-term durability, strength, and reliability.
Choosing the Right Gearbox
When upgrading or replacing gearboxes:
- For high-performance boards like THE ONE Racing Board, consider V4.3 2IN1 4G.
- For OX or boards with moderate performance needs, V4.3 2IN1 3G ensures broad compatibility.
- For Viper miniboards or Zephyr Pro & Base platforms, Linnpower ST/MINI gearboxes offer reliable straight-cut steel gear performance.
Compatible Linnpower Boards:
| Board Model | V4.3 AT | V4.3 MT | V4.3 2IN1 4G | V4.3 2IN1 3G | V4.3 ST/MINI | Board Wheel Compatibility | Gear Ratio * |
|---|---|---|---|---|---|---|---|
| EVO MK-1 | ✗ | ✓(160-9in wheel) | ✓(125-9in wheel) | ✓(125-9in wheel) | ✗ | 160mm-9in * | 4.3 & 3.6 |
| THE ONE | ✗ | ✗ | ✓(125-180 wheel) | ✗ | ✗ | 125mm-180mm | 4.3 & 3.6 |
| OX | ✗ | ✗ | ✗ | ✓(125-200 wheel) | ✗ | 125mm-200mm | 4.3 & 3.6 |
| Zephyr Max | ✗ | ✓ (160-200 wheel) | ✓(125-200 wheel) | ✓(125-200 wheel) | ✓(85-125 wheel) | 85mm-200mm | 2.6, 3.2, 4.3 & 3.6 |
| Zephyr Pro | ✗ | ✗ | ✗ | ✗ | ✓(85-125 wheel) | 85mm-125mm | 2.6 & 3.2 |
| Zephyr Base | ✗ | ✗ | ✗ | ✗ | ✓(85-125 wheel) | 85mm-125mm | 2.6 |
| Viper | ✗ | ✗ | ✗ | ✗ | ✓(85-105 wheel) | 85mm-105mm | 2.8 |
| MINI 5 | ✗ | ✗ | ✗ | ✗ | ✗ | 85mm-105mm | ✗ |
| * If the EVO MK-1 is using the V4.3 2IN1 gearbox, it is specifically designed to accommodate a minimum wheel size of 125mm. When using 9-inch tires, a larger hub ring needs to be purchased. * Gear Ratio: Changing the gear ratio requires purchasing a different motor gear. |
|||||||
Get Your Linnpower Gearbox Today!
Explore our Electric Skateboards and Custom Electric Skateboards:
- EVO MK-1 All Terrain Electric Skateboard
- THE ONE Racing Board
- Long Range OX All Terrain Board
- Zephyr Base & Pro Street Board
- Zephyr Max 2-in-1 Skateboard
- Viper miniboards
- Mini 5 Shortboard
With Linnpower gearboxes, you get All Terrain Boards, Street Boards, and 2-in-1 Skateboards built to last.
Important Note on Compatibility and Orders
While we strive to provide as much compatibility information as possible, please note that product iterations by different brands may result in compatibility issues. Additionally, when purchasing for DIY projects, there may be challenges in achieving compatibility. If you’re unsure whether you have the capability to resolve these issues, we highly recommend consulting us before placing an order.
Please note that all orders are final. Due to international shipping, we do not accept returns or refunds. Ensure that you have all the necessary information and support before confirming your purchase.
2 commentaires
Linnpower Team
@Jimark ventura Zephyr Max Gearbox Compatibility Guide:
For Zephyr Max, the following gearboxes are compatible: V4.3 MT, V4.3 2IN1 (3G&4G), and ST.
If you prefer street wheels (85mm–125mm):
Choose the Linnpower ST gearbox.
The stock bash guard fits directly with this setup.
If you like large wheels (125mm–200mm):
Choose the Linnpower V4.3 2IN1 3G gearbox.
You’ll need to purchase the OX bash guard to fit the Zephyr Max.
If you only ride via pneumatic tires only:
Choose the Linnpower V4.3 MT gearbox.
Please note that there is no bash guard option for this configuration.
@Jimark ventura Zephyr Max Gearbox Compatibility Guide:
For Zephyr Max, the following gearboxes are compatible: V4.3 MT, V4.3 2IN1 (3G&4G), and ST.
If you prefer street wheels (85mm–125mm):
Choose the Linnpower ST gearbox.
The stock bash guard fits directly with this setup.
If you like large wheels (125mm–200mm):
Choose the Linnpower V4.3 2IN1 3G gearbox.
You’ll need to purchase the OX bash guard to fit the Zephyr Max.
If you only ride via pneumatic tires only:
Choose the Linnpower V4.3 MT gearbox.
Please note that there is no bash guard option for this configuration.
Jimark ventura
What gear box is for the zypher max I read it but not sure which. ? I just got the max . And I would like to buy the gear box. Can you help me pick the one for it ?
What gear box is for the zypher max I read it but not sure which. ? I just got the max . And I would like to buy the gear box. Can you help me pick the one for it ?